Veteran Owned
Standby generator installation company in San Antonio TX installing a Generac backup generator
Generac Authorized Dealer · TECL ##TECL31793 · RMP ##RMP46592

Generator Installation Company in San Antonio, TX

C.S.W. Power Solutions is a veteran-owned generator installation company serving San Antonio homeowners and light-commercial properties. Our in-house crew handles the standby generator, automatic transfer switch, gas line, permits, CPS Energy coordination, startup, and repair support under one contractor.

Electrical Lic.#TECL31793
Plumbing Lic.#RMP46592
HVAC Lic.#TACLA26479R

Offer

Free load calculation with your generator quote

We'll size the unit against your real electrical load — not a guess.

Claim Offer

Why the GC umbrella matters

Generator Installation is handled in-house by our general contractor crew

C.S.W. Power Solutions is a veteran-owned general contractor first (VA Builder #09311). We hold the generator installation trade license ourselves (TECL#TECL31793 + RMP#RMP46592), so you get the accountability of a GC plus the depth of a licensed specialty crew — not a call-center dispatch to a sub.

  • No subcontractor runaround
  • Single point of accountability
  • One crew handles permits & inspections

Veteran-Owned Generator Installation Under a GC's Umbrella

C.S.W. Power Solutions is a veteran-owned general contractor and Generac-authorized installer serving San Antonio. The electrical license (TECL31793) and plumbing license (RMP46592) are both held by the GC itself, and we're VA Builder registered (#09311) — one contractor owns the full install from electrical to gas line to inspection.

Veteran & Military Discount Available — ask when you call.

Whole-Home and Commercial Backup Generator Installation

San Antonio's summer storms and CPS Energy grid events can knock out power for hours or days. A Generac standby generator activates automatically within 10 seconds of an outage — keeping your AC, refrigerator, and security system running without you lifting a finger. We handle permitting, CPS Energy coordination, city inspection, and light-commercial backup generator quotes.

  • Generac Standby Generator — 10kW to 26kW
  • Commercial Backup Generator Installation
  • Automatic Transfer Switch Installation
  • Generator Sizing & Load Calculations
  • Natural Gas & Propane Connections
  • Electrical Panel Integration
  • City Permitting & Inspection
  • Annual Maintenance Plans — $150–$400/yr
  • Generator Repair & Diagnostics

San Antonio Generator Services

Backup Generator Contractors for Homes and Light Commercial Sites

Generator projects work best when one qualified contractor owns the full path: sizing, permits, electrical integration, gas-line coordination, startup, and repair support after installation.

Generator installation company in San Antonio TX

Keep the page focused on full-service standby generator installation, not only equipment sales.

Targeted on /generator

Generator installation contractors in San Antonio TX

Make contractor qualifications obvious: TECL electrical work, RMP gas-line work, permits, and city inspection.

Targeted on /generator

Commercial backup generator installation in San Antonio TX

Clarify that CSW can quote larger residential and light-commercial standby systems.

Targeted on /generator

Backup generator contractors in San Antonio TX

Explain the one-contractor install path for pad, transfer switch, gas line, startup, and walkthrough.

Targeted on /generator

Generator repair San Antonio TX

Position repair and diagnostics as a support service tied to maintenance and load testing.

Open repair page

Generator Installation Cost in San Antonio

ServiceTypical Range
10kW Standby Generator$8,000 – $15,000
16kW Standby Generator$10,000 – $18,000
22kW Whole-Home Generator$15,000 – $25,000
26kW+ Commercial Generator$18,000 – $30,000+
Automatic Transfer Switch$800 – $2,000
Panel Upgrade (if needed)$1,800 – $5,500
Annual Maintenance Plan$150 – $400/yr

Generator installation requires permits from the City of San Antonio, CPS Energy coordination for gas connection, and a concrete pad. These are included in the ranges above. Older homes with 100-amp panels typically require a panel upgrade before installation — see panel upgrade pricing above. Free on-site assessment provided. Final price depends on generator size, gas line condition, and panel capacity.

Our Generator Installation Process

1

Free On-Site Assessment

We evaluate your electrical panel, gas supply, and ideal generator placement to determine the right system size for your home.

2

System Sizing & Quote

We calculate your critical load requirements and provide a detailed, itemized quote covering equipment, installation, and permits.

3

Permits & Scheduling

We pull all required permits from the City of San Antonio and coordinate with CPS Energy for any utility work.

4

Installation Day

Our crew installs the concrete pad, generator unit, automatic transfer switch, gas line, and electrical connections — typically in one day.

5

City Inspection & Testing

We schedule and pass the city inspection, then test the full system including automatic transfer and load testing.

6

Walkthrough & Warranty

We walk you through system operation, maintenance requirements, and register your Generac warranty.

Generator Installation Requirements

Most generator installations require an electrical panel upgrade to accommodate the transfer switch and additional load. If your home has an older 100-amp panel, we typically recommend upgrading to 200 amps as part of the project. Generator installations also require gas line connections — and as a licensed plumbing contractor, we handle that in-house. Many homeowners who install generators also add an EV charger at the same time to take advantage of the panel upgrade. For a full breakdown of what to expect, read our complete guide to generator installation in San Antonio.

One Contractor. All Trades.

C.S.W. Power Solutions is more than an electrical contractor. As a licensed general contractor, we also provide plumbing and HVAC services in-house. Projects that require multiple trades — like home remodels or damage restoration — are managed under one roof for faster completion and lower cost. No subcontractor markup. No scheduling conflicts. One point of contact from start to finish.

Generator Installation FAQs

We install Generac, Kohler, and Briggs & Stratton whole-home and portable standby generators, plus transfer switches and sub-panels.
Yes. Generator installs typically require a City of San Antonio electrical permit and a CPS Energy coordination, both of which we pull and manage.
Most whole-home installs take 1–3 days once equipment is on-site, plus lead time for the unit.
Yes. We are authorized Generac dealers and install whole-house standby generators ranging from 10kW to 26kW+. Installation includes a concrete pad, automatic transfer switch, gas line connection, electrical tie-in, and all required permits and inspections.
Plumbing Lic. #RMP46592HVAC Lic. #TACLA26479RElectrical Lic. #TECL31793

Ready for Backup Power?

Contact C.S.W. Power Solutions for a free generator installation estimate.

Financing Available · Veteran & Military Discount · Free Estimates